triumphs
[Top] [All Lists]

RE: Help needed with electrical gremlins OR need lights for TRF Summer

To: "'Gary Fluke'" <res0s0t7@verizon.net>
Subject: RE: Help needed with electrical gremlins OR need lights for TRF Summer Party
From: "R. Ashford Little II" <ralittle2@mindspring.com>
Date: Tue, 29 Jul 2003 11:22:18 -0400
Cc: "6-Pack" <6pack@autox.team.net>, "Triumphs@autox. Net" <Triumphs@autox.team.net>, "Dave Massey" <105671.471@compuserve.com>
Thanks to Gary, Dave and a few others for their ideas.  I'm on the right
track, although I haven't fully fixed it yet.  So, yes Dave we may be
having a little parking lot tech session.

See you guys next week.

R. Ashford Little II
www.geocities.com/ralittle2


-----Original Message-----
From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net] On
Behalf Of Gary Fluke
Sent: Monday, July 28, 2003 3:08 AM
To: R. Ashford Little II
Cc: TR6 list
Subject: Re: Help needed with electrical gremlins OR need lights for TRF
Summer Party

R. Ashford,

Based on a review of the 1970 TR6 wiring diagram posted at the British
V8
site (thank you Dan Masters!) I have the following questions/comments:

1.  When your license plate lamps quite working, did your rear side
marker
lamps quite working, too?  They and the tail lamps are all fed by the
same
wire.

2.  When you press the brake pedal, do the tail ("running") lights or
rear
marker lights come on, too?

3.  The wiring diagram shows the original wires to the brake lights to
be
green/purple stripe.  Are those still connected to the brake lights?
What
do the red wires in the brake area connect to?  It sounds as if someone
rewired the rear lights and/or connected auxiliary wires, maybe for a
little
trailer.

4.  The wiring diagram does not label the brake lights as to whether
either
is left or right.  However, if the positions follow the conventions of
the
rest of the lamp positions on the wiring diagram, the left brake lamp
will
originally have had two positive connections.  One is from the voltage
source, the other wire runs over to the right brake lamp, which
therefore
needs only one connection.  The original lamp housings with two tabs
were,
of course, sufficient and superceding ones with three tabs won't hurt
anything at all.

The wiring diagram is at:

http://www.britishv8.org/techhome.htm

Maybe looking at that will help you in finding the problem.


Gary
'73

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>
  • RE: Help needed with electrical gremlins OR need lights for TRF Summer Party, R. Ashford Little II <=