Message text written by "Dave B. Hammond"
>I am having difficulty locatong a mounting point for the latch on a three
point system. I have the inertia reel location near the rear lower part
of
the door opening; the pivot point on the inner fender well, but cannot
locate the point near the rear of the seat next to the driveshaft tunnel
where the catch mounts. There is a body to frame bolt, but it is only 5/16
and the rest of the mounting bolts are 7/16.
<
Dave, the inside seat belt (the one with the buckle) is attached directly
to the frame. There is a hole in the floorboard that allows access to the
hole which takes a fairly large bolt - 7/16 I think.
You may have to tip the seat up and fold back the carpet to see it.
Dave Massey
71 TR6
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|