Try using some liquid detergent inside the mouth or on the fitting. Helps it
slip on easy and will act as a sealant.
Don Spence
Video Production Centre
> From: owner-triumphs@autox.team.net (Triumphs@Autox.team.net daily digest)
> Reply-To: owner-triumphs-digest@autox.team.net
> Date: Tue, 6 May 2003 23:38:25 -0600
> To: triumphs-digest@autox.team.net
> Subject: Triumphs@Autox.team.net daily digest V1 #1546
>
> Subject: Sealing with those pesky wire hose clamps
>
>
>> OK, how do you get those pesky original wire hose clamps to seal? They
> never
>> seem to tighten up enough, and a good 7lbs radiator cap will blow a leak
> in
>> the system, even with silicone.
>>
>
> What do y
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|