triumphs
[Top] [All Lists]

Re: IRS input flange/nut torque spec

To: "Randall Young" <Ryoung@navcomtech.com>
Subject: Re: IRS input flange/nut torque spec
From: Darrell Walker <darrellw@inetarena.com>
Date: Sat, 8 Mar 2003 19:33:56 -0800
Cc: "tr list" <triumphs@autox.team.net>
On Saturday, March 8, 2003, at 01:48 PM, Randall Young wrote:

>> If it still leaks, any ideas?  The shop manuals just say "install the
>> seal".  It doesn't seem like I could use any type of sealer, though I
>> probably could have smeared it with some type of non-hardening sealer
>> before I put it in.
>
> A little Permatex Aviation may help.  But first, inspect the bore in 
> the
> housing for any nicks or gouges.  The outside of the seal usually 
> doesn't
> need any help.

So far it is still holding.  I probably won't be able to install it 
until next weekend anyway, so I'll keep an eye on it.  I might make 
sure it holds by ordering another seal :-).


-- 
Darrell Walker
66 TR4A IRS CTC67956L
Vancouver, WA, USA

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>