Thanks to Rich Rock for sending:
>
> Torque specs from the Bentley TR250 and TR6 manual:
>
> Lower wishbone mounting bracket to frame 20-25 lb/ft
> Lower wishbone to mounting bracket............38-46 lb/ft
> Lower wishbone to vertical link.....................50-65 lb/ft
>
Which brings up another question. I assume "Lower wishbone to vertical
link" means the bolt through the trunnion. I've always used the TR4
instructions (5 lbs then back off a flat), since the Bently/Factory manual
is pretty much mute on the whole 4A front suspension. 50-65 is a big
difference, might explain why I wear trunnions out. Can anyone with a 250/6
manual tell me if this area should be lubricated at all during assembly? Or
is anyone willing to scan and post (or send me, and I can put it up) the
relevant sections of the 250/6 manual for the front suspension?
Thanks,
Darrell
--
Darrell Walker
66 TR4A IRS CTC67956L
Vancouver, WA, USA
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|