Hi Corey
Most important help I can offer, budget for a dust extractor, something with
cleanable filters or bagless technology!
We have a small bead blasting cabinet at work for cleaning thermal coatings
(die coat) from dies for aluminium casting, runs at 80 psi off a compressor
which is capable of running a factory, it is near useless, it fills with
dust in about 5 seconds making any progress near impossible.
Fitted an industrial vacuum cleaner to the side of it, works a treat now.
Go for one with a deep collection area tapered from all sides (some are only
tapered from two sides so the medium is too spread out, this is a problem
with the one at work!) or the medium will not return to the pickup
efficiently.
Graham.
----- Original Message -----
From: <cm.sherman@verizon.net>
Subject: Recommendations sought: Blast Cabinet
> Looking for the List's opinion (again) for a tool recommendation: Blast
> Cabinet.
>
> Your assistance please.
> Thanks everyone.
>
> Corey Sherman
> cm.sherman@verizon.net
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.455 / Virus Database: 255 - Release Date: 14/02/03
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|