Check your textbooks gentlemen, uneven pad wear on the same caliper is almost
always caused by a problem in the slide mechanism. Clean the pins & the
mounting surfaces, if the pins are rusty or bent replace them. Lube with a
quality high temp substance, Sylglyde comes to mind (NFI),that says it is to be
used on brakes. Probably not an issue on old Girling systems but make sure none
of the seals around the sliders are swollen from exposure to petroleum based
lubricants-if they are replace them.Alex
--
__________________________________________________________
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|