On 12/28/02 8:41 AM, "jack williams" <jackandangie@attbi.com> wrote:
> Okay folks, I've got my new trailing arm bushings in an I'm going to install
> them hopefully today. I have no doubt I can do the job, but if there is any
> collective wisdom out there from people that have been there done that, it
> would be appreciated. I'd like to do this as easy as possible, and I figure
> some of you have found some shortcuts/easier ways to get the job done.
I found that a small "bottle jack" can be used to push the old ones out and
push the new ones in. Use the opposite "eye" to brace the base of the jack,
and use a bolt in the bushing you are removing/installing.
--
Darrell Walker
66 TR4A IRS CTC67956L
Vancouver, WA, USA
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|