Dan-
Torque head "stone cold" only.
Tim Hutchisen
71 TR6
80 TR7 Spider
----- Original Message -----
From: <clancy36@attbi.com>
To: <triumphs@autox.team.net>
Sent: Saturday, November 09, 2002 6:07 AM
Subject: cylinder head retorque
> any advise on cylinder head retorque i have about a thousand on my rebuild
and
> im going to run the valves again to today, figured id retorque the head
also,
> should the retorque be done with block at operating temp or cold when i'm
doing
> the valves.
> dan
> 70tr6
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|