Patrick, a large bristle stainless steel brush, this is exactly how TRF &
other shops clean carbs to look as original, Eastwood sells a spray can of
carb dye (paint), and of course I can powder coat them, if you have access
to a blasting cabinet, walnut shells or even glass beads (50 lbs air
pressure) do a beautiful job, the carbs will still weather rather quickly
using any of these resto methods except one, you can guess which one that
is. "FT"
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|