Hi Dave,
> It slides in from the back, you need to wiggle it slightly
> into position, it
> should fit in easily. I fastened the rear first (the bolt
> goes thru the left
> lower corner of the glove box and attaches to a small " L"
> braket on the top
> of the heater rail. After that, pull the box forward to you
> from behind
> while pushing the front screws up from underneath the lip on
> dash. This has
> worked for me and I seem to take it out a couple times a year
> for some fix
> or another. Good luck
>
That is what I originally thought, but when I try that there seems to not
enough room between the heater and outer footwall. I have tried to gently
squeeze and "coax" it into place but it seems not to want to go. I have
double checked that I got the right box from the moss catalog.
Can I loosen off the dash on the passenger side to provide a little more
"nudging" room? I wouldn't think I have to trim it, do I :-( ?
Thanks
David Templeton
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|