----- Original Message -----
From: Northway, Barry <BNorthway@textron.com>
> The consensus at The Roadster Factory
> is that the higher raised portion goes toward the boot opening (that is, on
> the inside). That's how I had installed the old one 12 years ago but it was
> always hard to close the lid and didn't seem to seal all that well. Now,
> when I think about it I'm not sure that way is correct.
Hi Barry,
I sell essentially the same section as it's applicable to most Triumph
Heralds and I'm sure many other Triumphs too. You have fitted the seal
correctly in the past with the higher lip on the inside. The original pattern
seal can be less than effective, which is why I also carry an aftermarket seal
which I sell for cars where practicality is more important than originality,
Cheers,
Bill.
--
Rarebits4classics
.......just what you've been looking for
PO Box 1232
Calne
Wiltshire
SN11 8WA
United Kingdom
http://www.rarebits4classics.co.uk
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|