Hi Kyle.
Thanks for the follow up info.
All I need now is confirmation from someone with both a TR6 and a GT6 that
the callipers are the same, then my friend can start looking into fitting
them to his GT6!
Graham.
----- Original Message -----
From: "kkrice1"
Subject: RE: Brakes
> Graham,
>
> The brakes are from an 84 Toyota 4x4 Truck. You must use the ones from
the
> 4x4 not the two wheel drive. For the 74, the only thing you need to do is
> make new hard lines (the short ones) as the original ones will be too
short.
> You do need to trim the dust shield but that was very easy as well. Other
> than that, nothing to it. I think there is a write up on the VTR site or
> some other web site. If you can not find it, let me know. It is so easy,
> you really do not need any directions. I purchased fully loaded calipers
so
> all I had to do was bolt them on.
>
> Kyle.
Big Scissors job here. <Snip>
> > Subject: Brakes
> >
> >
> > Hi Folks
> > I was just talking to a friend with a GT6 about brakes, and uprating
> brakes.
> > He mentioned that the callipers are the same as TR6 including the use of
> > Metric versions with the special shouldered bolts.
> > Can anyone please confirm this and if true, has anyone ever fitted the
> > Toyota(I think?) calliper that can be fitted to the TR6 to a GT6?
> >
> > Thanks in advance.
> >
> > Graham.
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.381 / Virus Database: 214 - Release Date: 03/08/02
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|