The M/C may be a rebuilt unit. If it is, there should be a plate attached to it
indicating so, which is bad news ... because that means you'll need an oversize
rebuild kit. Last time I looked they were unavailable from any supplier, which
meant I had to spring for a whole new (oversized and rebuilt) cylinder.
--
Martin Secrest
72 TR6
73 GT6
Mark Saffian wrote:
> >My Slave Cyliner is leaking from the seal / rod, when I push
> down the clutch. Should I try to find a new seal / rod, or a
> New Cylinder?
>
> This is, unfortunately, a pretty standard (and periodic) failure. If
> the cylinder is OK, you can get a rebuild kit with the seals for less
> than US$20. If not, complete master cylinders are available but I am
> not sure of the price.
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|