dwillner wrote:
> I've had a bad stop light switch..... I'm assuming fluid
> will shoot out of the 5-way connection and I'll need to replace lost fluid and
> then bleed the brakes.
I don't think it will shoot out, maybe a steady drip. If you remove the
reservoir
cap and put a piece of Saran wrap over the opening, then replace the cap (all
before opening the line) this may slow down the fluid loss.
I usually cut the corner off a Ziploc baggie and slip that over the end of the
input pipe, securing it with a wire twistie. You should lose very little fluid
and be able to easily bleed any air introduced.
Geo Hahn
59 TR3A
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|