I put up a simple web page to illustrate the problem I am having with
wheel/fender gap I described below. Feel free to take a look and share
your thoughts/solutions. One other thing I thought I would share, the gaps
were fine before I took it all apart...
http://home.teleport.com/~ebuzz/
Thanks,
Eric
At 12:37 PM 5/11/02 -0700, Eric Miller wrote:
>Thanks for all the replies to my tire size question. I decided to go with
>205/65-15 Yokohamas and had them mounted and balanced last night. They are
>now on the car and they look pretty good.
>
>Now I have another question. I am almost done with a frame-off restoration
>on this car. The drivetrain is in and the body is back on the frame but
>the way it sits now there is quite a bit more of a gap between the top of
>the front tire and the fender opening lip than in the back. I don't think
>I put anything back together incorrectly during the suspension rebuild so I
>am hoping this is common and it will settle down once I start driving it.
>The gap in the front is about two inches more than in the rear.
>
>Anyone have any thoughts on this?
>
>Thanks,
>Eric Miller
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|