> Harry
> I wonder if you have a tight valve guide.
> Carl
That's sure what I'd look for, especially if you used the bronze guides for
the rebuild. According to BFE they have to be reamed slightly larger than
the original cast iron guides, to prevent sticking.
Much less likely would be a bent or defective valve, causing it to stick in
the guide.
Randall
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|