THANKS!
>
>--part1_fe.17ad064b.2a0a48dd_boundary
>Content-Type: text/plain; charset="US-ASCII"
>Content-Transfer-Encoding: 7bit
>
>In a message dated 05/07/2002 11:34:14 PM Eastern Daylight Time,
>pethier@isd.net writes:
>
>
>> I had one obvious problem with the gasket on the gas-gauge sender. With
an
>> offset screwdriver, I had little problem putting in the rubber seal that
>> Vicky Brit sells. Takes patience. Don't drop a screw into the tank...
>
>I had a similar problem getting to the screws, I changed the screws to an
>Allen head type ... much easier. As far as your gas smell ... vent gasket,
>filler hose connection, sender unit gasket ... all suspects. I replaced all.
>Ed (58 TR3A)
>
>--part1_fe.17ad064b.2a0a48dd_boundary
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|