You have to wire it in series with EVERYTHING except the fat cable to the
starter motor. Otherwise you'll just be measuring the amps used by one
device- not too useful.
At 08:29 AM 5/8/2002 -0600, you wrote:
>i have purchased one of those 3 guage jobs and mounted it under the
>dash.
>on the ammeter the instructions say to wire it in series with either the
>starter solenoid or the horn relay. any suggestions as to which would
>be better ? the solenoid is right there behind the firewall. i think
>the horn relay is over behind the steering wheel (on the firewall).
>appreciate any feedback.
>thanks, larry lstein6@earthlink.net
--
Erik Quackenbush, Midwest Filter Corporation
1-847-680-0566 http://www.midwestfilter.com
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|