Steve,
If everything is properly lined up on the pin in the "middle" of the spring,
the only remaining possibility I can think of is that you have the spring on
backwards. From the forward eye to the axle should be 18 inches. From the
axle to the after most eye should be about 21 inches.
Hope thin helps,
Bill
In a message dated 5/5/2002 1:46:46 AM Eastern Daylight Time,
scdennis@email.msn.com writes:
> I had the rear end and leafs off my TR4 for cleaning and painting. I
> reinstalled everything per the factory workshop manual but now the rear
> axle
> sits about an inch and a half further back on the chassis. It's almost
> hits
> the rear of the bump strap. Can anyone give me a clue??
>
> Steve Dennis
>
Bill Babbitt
TR3A like a Phoenix emerges from the bag
Gales Ferry, Ct
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|