> I'd like to have a set of spare points/condensor set up for
> emergency. I'd
> like to have this as a "drop - in" as some of you fellow listers
> have so well
> recommended. My question is, do I need both the moving contact
> breaker plate
> and the contact breaker base plate to accomplish a "drop - in" spare. The
> contact breaker base plate is the unit held by the two screws. My
> assumption
> is that I would need both. Please confirm, or otherwise correct me.
Ed :
I believe on my dizzy, which is probably a non-original/replacement 25D4
(don't recall offhand), the screw that locates the points must be removed in
order to separate or assemble the two plates. Assembling the two plates is
a bit 'fiddly' too, so my preference is to carry both plates assembled (with
points already gapped).
Randall
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|