> Placing a dial indicator with a mag base on the head with
> the indicator point square to the top of the valve spring collar yielded a
> different results. The #1 & #4 exhaust valves measured .390" & the #1 & #4
> intake valves measured .413" & .400" respectively. Howz comin'?
Mark :
I'd check the lift directly at the push rods next, to be certain the cam
wasn't poorly ground. If that checks out, ship the whole rocker arm
assembly off to Rocker Arm Specialists to be rebuilt.
Rocker Arm Specialist
19841 Hirsch Court
Anderson, CA 96007
Tel (530) 378-1075
fax (530) 378-1177
mailto:rocker@c-zone.net
http://www.shastacounty.com/rockerarm/
NFI, etc.
Randall
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|