Hugh:
This should be a very simple, straight forward procedure. It installs
from the rear of the cover. Ensure that the seal is facing the proper
way. Lubricate the outside of the seal and the inside of the timing
cover opening. You should almost be able to push it in by hand. A block
of wood that's bigger than the diameter should spread a couple of hammer
blows to drive it home.
I hope this helps.
Bob Fabie
[demime 0.97c removed an attachment of type text/x-vcard which had a name of
rmf3860.vcf]
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|