Hi Dave:
By chance my emblem is not on. So here are the numbers:
Measured from the right-side joint between valence and fender:
leftmost hole = 174 mm
rightmost hole = 43 mm (~1 11/16")
distance from top of valence to holes = 30 mm =(~1 1/8")
Try to measure in teh dark using a clear ruler with black lettering over a
semi-gloss black background!! Little flashlight to light it up. Anyway this
should be fairly accurate.
Have fun,
Mark Hooper
-----Original Message-----
From: Dave Hammond
To: triumphs@autox.team.net
Sent: 19/04/02 5:56 PM
Subject: Re: Rear TRIUMPH emblem
I'm in the process of finishing the restoration of my TR6 and want to
mount
the TRIUMPH emblem on the rear-but the body shop filled the holes and I
don't know where they are. Can someone out there measure theirs and
email me
the location?
Dave in Medford
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|