Hi Brad,
Where did you get the shaft that has the grooves for the
circlips? Wouldn't mind having one of those myself.
Drew
> Date: Mon, 18 Feb 2002 19:47:24 -0800
> From: "Brad Eells" <bradlnss@lightspeed.net>
> Subject: RE: TR3 Fuel Pump
>
> Go with the dropping the pan option. Not only do you have the pump lever
> down there, you have about 6 washers that may have slipped off the pump
> shaft.
>
> This problem happened to me several times as the pump shaft is pressed in on
> some models of the pump and have a tendancy to work their way out. I finally
> acquired a pump shaft that has a circlip on each end.
>
> I rebuilt the pump at least twice by the side of the road. The next time I
> had the sump off...it was full of washers!
>
> JB Weld or Loctite Red would be the next best thing if you can't find a
> shaft with circlips!
--
Drew Rogge
drew@pixar.com
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|