Ben
Try Racer Wholesale (http://www.racerwholesale.com). They have P/N AUT-109
"5/8" eyebolt, nut & washer" ($2.99 ea.). These are designed to hold auto
racing harnesses in place and (if the thread is the same as what you need),
will undoubtably be more than strong enough.
Hugh Barber
Hollister, CA
'73 TR6
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of Ben/Pam Zwissler
Sent: Saturday, February 16, 2002 5:09 PM
To: Triumph Mail List
Subject: Source for TR-4A Seat Belt Eye Bolts
I'm in the final stages of preparing my TR4A "tub" for paint and need to
replace the seat belt anchor eye bolts that attach to center driveshaft
tunnel
and the inner rear fenders. These are listed in the parts catalog at part
number 612531 Bolt, eye, safety fixing harness. TRF doesn't list them in
their price list and my local hardware sources don't have similar parts.
The local Lowes has eye bolts that are bent but not closed. I'm guessing
these wouldn't have the strength of the factory style.
Anyone had any luck finding these somewhere? I don't really need the bolt
to
finish the tub, but I need to make sure the nut welded to the body is
correct
for whatever I use.
Thanks,
Ben Zwissler
bzwissler1@insightbb.com
Columbus, IN
66 TR4A IRS OD
80 TR8
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|