Just installed the oil cooler setup on my TR6 and can't get the threaded
hose connections to the engine adapter to stop leaking. I've put flexible
Permatex No. 2 on the threads and that helped some. For obvious reasons, I
don't want to really crank those hose fittings too tight. Is there a
sealing washer or something I'm missing? What about the hose fittings that
are screwed into the adapter bosses (came installed out of the box)?
Thanks.
Rick Orthen
72 TR6
"Really Marking its Spot"
-----------------------------------------------------------------------------
This message is for the designated recipient only and may contain
privileged or confidential information. If you have received it in error,
please notify the sender immediately and delete the original. Any other
use of the email by you is prohibited.
-----------------------------------------------------------------------------
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|