Listers;
Just finished the teardown of the bonnet assembly on my doner GT6 for my
spit6 project.
What a mess, the leading edge of the bonnet is toast. the rest of it is
solid and rust free.
I have new fenders and misc pieces already. The wheel wells can be
saved, pitted but solid.
So my options are, Fabricate replacement pieces and mig them into the hood
or find a leading edge from a donor that can be welded on in one piece. I'm
taking an auto body course and have access to a complete body shop.
Anyone out there got any other suggestions/ comments?
check out pics of the damage at http://members.aol.com/khoco/GT6
if anyone has a junk hood out there with a solid leading edge we could
talk.
TIA
Ken
Ken Copeland
70 GT6+ KC78784
70 Spit FDU84919
70 GT6+ KC81551 (Ok so I like 70s)
VTR
NET
CCBCC
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|