Thanks Dick and everyone else that responded. I had advice (from a non-LBC
guy) that I might make some kind of fixture to raise it on the oil pan
flanges or something. Guess that isn't necessary. I'm gonna do as many
suggested and put a piece of wood on the jack and lift it under the pan.
- Hugh
> -----Original Message-----
> From: Sally or Dick Taylor [mailto:tr6taylor@webtv.net]
> Sent: Friday, February 08, 2002 9:50 PM
> To: Hugh Fader
> Cc: triumphs@autox.team.net; 6pack@autox.team.net
> Subject: Re: Lifting TR6 engine for cam removal
>
>
> Hugh---The pan seems to be up to the task of supporting a lot of the
> engine weight. Just the cam side motor mount needs to be
> unbolted to get
> the engine high enough. Jonathan and I just went thru this
> cam change to
> get his '74 ready for the Ca. emissions check.
>
> Dick T.
> L.A.
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|