DO IT ON THE FRAME. Your frame is your alignment jig. If the new floors
are out a bit here or there and you need to do a bit of snipping, the door
gaps etc. will be correct if you do it on the frame.
Don Elliott, 1958 TR3A
Montreal, Canada
<slarch@nisource.com> wrote
> When changing the floor pans, would you recommend doing it with the tub on
> the frame or can this be done with it off the frame. I would use
> reinforcement brackets across the top of the door jams but not sure this
> would keep things in line when cutting out the old floor. Any thoughts?
>
> Scott Larch
> 76 TR6
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|