Hi Folks,
Well, I just got my TR6 engine back from the shop after a complete overhaul,
re-bore, oversived pistons, etc. I am putting the crank back in and have
convinced myself that I am putting the thrust washers in backwards. After
reading numerous postings I am still not sure. I have them in with the oil
groves facing towards the outside of the engine, not on the bearing side.
Someone please tell me if I am right or wrong. Thanks
Dan H. Detweiler
"70 TR6
CC51639
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|