Hi Bob,
I'm having a hard time picturing these, but from the 6" long bolt, sounds
like it comes from a rear bumper. There are pretty good schematics in the
parts catalogs, if you don't have one I can scan it and send it to you.
Bob K
----- Original Message -----
From: <Tr3bob@aol.com>
To: <triumphs@autox.team.net>
Sent: Wednesday, November 28, 2001 4:35 AM
Subject: Bumper brackets
> Hi listers,
> I've got a little mystery on my hands.
> I'm starting to put the front bumper horns back on the chassis, and I
noticed
> 2 offset brackets in the parts box.
> These brackets have rounded ends, about 11/2"wide and 5"lg with an
elongated
> clearance slot on one end and a clearance hole for a 5/16 bolt on the
other.
> The offset is about 1/2" in the center. One extra bracket assembly has a
> rusted 6" long bolt with a 11/2"lg spacer attached.
> I think that they go somewhere around the front bumper horns but I can't
for
> the life of me figure out where.
> Can you help?
>
> TIA
> Bob Stahlbush
> 66 MGB GHN3L 78708
> 61 TR3A TS 81398 L
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|