triumphs
[Top] [All Lists]

Re: TR Rear seal - Kas techique

To: "Randall" <randallyoung@earthlink.net>
Subject: Re: TR Rear seal - Kas techique
From: "BOB KRAMER" <rgk@flash.net>
Date: Wed, 21 Nov 2001 15:48:40 -0600
Cc: <triumphs@autox.team.net>, <fot@autox.team.net>
Organization: Prodigy Internet
References: <RELAY1gN5x3FI0ql0lv000015b1@relay1.softcomca.com> <3BFBC95D.C7B927ED@earthlink.net>
After one look at the felt provided in the gasket set, my machinist pulled
out a dusty old box filled with a style of rope that was used in the old
days in this application. He told me to hammer it in as tight as I could. No
leaks, yet, and with the crank seal kit I lose very little oil.

Bob Kramer
rgk@flash.net
----- Original Message -----
From: "Randall" <randallyoung@earthlink.net>
Cc: <triumphs@autox.team.net>; <fot@autox.team.net>
Sent: Wednesday, November 21, 2001 9:33 AM
Subject: Re: TR Rear seal - Kas techique


> "spitfiresuz@141.com" wrote:
> >
> > I have just spent some time in the garage hammering 26 inches of
pantyhose into
> > the slot in the axle and it looks great.  But I have a small problem.  I
can
> > only get the felt seal up to my knees!
>
> BFE sells extra felt, since there isn't enough in the gasket set !
>
> <g>
> Randall

///  triumphs@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe triumphs
///
///  or try  http://www.team.net/cgi-bin/majorcool


<Prev in Thread] Current Thread [Next in Thread>