List,
I am replacing the front suspension bushings on a TR4A. I am having
difficulty removing the bushings from the lower wishbone on the end opposite
the trunion. There is a steel sleeve in the center and the bushing has
"flanges" that go up the sides. I tried cutting the flange off both ends and
press the bushing out using two sockets in a vise but it won't budge. I
don't have the new bushings yet so I can't really tell how they go in or
come out.
Any suggestions would be greatly appriciated.
Dave Connitt
Cincinnati, OH
'65 TR4A
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|