Kent Shrack wrote :
> I have a bracket that I took off, and restored, 18 years ago, I think
> somewhere from under the dash, and am (Finally) ready to put it back on in
> the reassembly of my TR3. (If I could only find where) The bracket is
> an angle, approx 3/4" x 1-1/2" and is approx 3/4" wide. It has a 3/16
> stud approx. 1/2" long fixed to the center of 3/4" leg, and 1/4" hole
> toward the end of the 1-1/2" leg. It was in with the Misc. brackets for
> the heater and ash tray. So, solve this mystery,,, Where 'o Where does
> my little bracket go?
Kent ,
Could that be the bracket that supports the rear of the glovebox
against the firewall ?
Cheers
Mike Kitchener
60 TR3A TS 75178
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|