> Cliff Hansen wrote :
> I tried to bolt up my new KN minilite-style wheels to my TR4A, and
> discovered that the lug holes in the wheels don't quite match the wheel
> studs.
"Michael D. Porter" wrote:
>
> My own drift on this is that if it happens on more than one set of
> hub/studs, it's the wrong wheel, or the the jigging for drilling the KNs
> is a bit haphazard. If just one hub, it might be that the studs are
> either bent, or loosening in the hub and are cockeyed.
I'll agree with Michael, except to add that I believe there's a very
common metric bolt pattern (used on Miata's and whatnot) that is just a
mm or two different than the TR2-6 pattern. I've even had tire/wheel
dealers try to tell me "they're the same thing" ...
Randall
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
|