First of all, thank you to everyone who has offered advice on this
topic so far. However, I am still faced with the problem of
extracting the wiring from the long tube (which I have removed from
the car, and have disconnected from the control head).
I am left with the tube with wires protruding from each end ( no
connectors or anything on the wires) and I am unable to pull the
wires out of the tube from either end. In desperation I have squirted
PB Blaster into the tube, and currently have it hung up in my garage
with a heavy weight attached to the wires at one end in the hope that
stress and time might work their magic, but so far no luck.
I have tried pulling individual wires out, without success, as I
suspect the wiring harness is spirally wound in the tube.
Anybody BTDT?
Dave
--
1957/1960 Triumph TR 3A
# TS24301/TS80479
Reconstruction Project
David and Carol
The Saltbox Bed & Breakfast
Niagara-on-the-Lake, Ont.
<www.carolssaltbox.com>
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
|