List,
I think I figured out how the fastner goes together between the body and
frame adjacent to the engine. Make a sandwich of the large aluminium washer
and the thicker rubber washer which is installed between the body and frame.
Place a flat washer and the thinner rubber washer on the bolt and run thru
the hole. Flat washer, split washer, and nut on the bottom.
Only about 5 or 6 more setups to figure out. (I wish I had been the one to
take the body off so I knew where all this @#**$@ goes.!!!!)
Dave Connitt
DC Engineering, Inc.
1071 Bandanna Drive
Cincinnati, OH 45238-4225
Phone: (513) 922-3551
FAX: (513) 922-8997
Cell: (513) 484-8420
email: dave@dceng.com
www: http://www.dceng.com
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
|