Thanks for the feedback, Don and Hugh, on my TR4 home-grown
radiator duct question. Here's my current plan:
1. sleeved thermostat (ordered from Moss w/ a couple things)
2. repair radiator cracks at base of filler neck, shorten neck
3. install yellow fan, shorter hub, while radiator is out for repair
4. fabricate ABS upper duct to replace tatty fibreboard original
5. if I enjoy #4, fab a lower duct later in the Interest Of Science
When #2 is done, I'll find out if the radiator needs to be recored.
If so, I plan to "lose" the crankhole -- and gain a bit more cooling
in it's place.
--
Steven Newell
Denver, CO
'62 TR4
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
|