Folks, here is an e-mail I received. The only thing to add is that he has
checked the hose between the MC and slave and says it is OK. Anyone help
him? Thanks.
Art Kelly '64 TR4
-----------------------------------------------------------------------------
-
-------------------------
From: golface@mediaone.net
Art, I read your story about your clutch flex line and I am wondering if I
have the same problem. I replaced the clutch,pressure plate and throw out
bearing.I am useing DOT5 fluid and I cannot get into 1st or reverse without
grinding the gears(a gut wrenching feeling) . I have to pump the clutch 3 or
4 times in order to get into 1st or reverse.I have bleed the system at least
5 or 6 times,using three different methods. I don't think there is air in the
line now and I have the slave rod connected to the middle hole on the clutch
lever. The only thing I can think of now is to replace the flex line although
I did not have this problem before replacing the clutch. What do you think?
Need Help,
Richard
///
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
///
|