Orientation of the Seals. Offset to the inside or outside

triumphs

Orientation of the Seals. Offset to the inside or outside

To:	ryoung@navcomtech.com, Dayj@inac.gc.ca, musson@chekhov.arts.usf.edu
Subject:	Orientation of the Seals. Offset to the inside or outside
From:	N197TR4@cs.com
Date:	Sat, 31 Mar 2001 13:52:03 EST
Cc:	vtr-admin@autox.team.net, triumphs@autox.team.net

I got three answers to my question, reagarding the trunk and tire cover seal 
orientation...one for the inside, one for the outside, and one who wants to 
know, too.

With all of the restorations going on out there, there may be more.

I'd like to try this again. Perhaps the VTR TR3A consultant is out there. 

Thanks....

Joe Alexander
N197tr4@cs.com

///
///  triumphs@autox.team.net mailing list
///

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Orientation of the Seals. Offset to the inside or outside, N197TR4 <=

Previous by Date:	TR4 or TR4A seats sought, John T. Seim
Next by Date:	Control Rod Assembly for TR6, R. Ashford Little II
Previous by Thread:	TR4 or TR4A seats sought, John T. Seim
Next by Thread:	Control Rod Assembly for TR6, R. Ashford Little II
Indexes:	[Date] [Thread] [Top] [All Lists]