Bob,
I just use PPG Epoxy Primer and regular old PPG Enamel Paint (Delstar) DAR9000
is your basic black!
Joe
"Westerdale, Bob" wrote:
>
> Joe-
> Any preferred brand names for the paint you favor? Hopefully not
> anything bearing the name Rustoleum; possible you remember an earlier rant
> I posted about the troubles I have had with that stuff. Incidentally, very
> recent experience shows that 3M Seam Sealer applied over Rustoleum also
> causes the dreaded Grunge, as does Dupli-Color's Rubberized
> underbody/undercoat. In both cases I had to start over again from bare
> metal. The Rustoleum had been on the car for 4 days, and I had 'baked' it
> with my kerosene heater until there was no perceptible odor from the paint.
> ( i.e. trapped thinners)
///
/// triumphs@autox.team.net mailing list
///
|