Dan Buettner wrote:
>
> My question for the list is this: do you think that boring out the
> taper fit on the shock arm, and using a 7/16" grade 8 bolt/stud with
> grade 8 nuts and washers on either side, will work?
Dan :
Sounds reasonable to me, but I would use a bolt with a smooth shank, and
bore the shock arm to be a light press fit on the bolt shank, basically
making the bolt part of the arm. Use flat washers only if absolutely
necessary for alignment/clearance, no lock washers, and torque the bolt
enough to get some stretch on it.
Randall
///
/// triumphs@autox.team.net mailing list
///
|