Greetings,
The ignition switch on my '73 TR6 has a mystery wire on it.
There's a little plastic housing with brass contacts riveted to the side of
the switch housing, from which this wire starts. It's a black wire with
green tracer, about 4" long, with a bullet on the other end, which
connects into the main harness.
It grounds to the switch body only when the key is removed and
the lock pin pops out.
I suspect it has something to do with seat belt interlocks. It's just
odd that it's not on any wire diagram I have seen, Haynes, Bentley or
Master's!
What's it's function?
TIA
Rick
///
/// triumphs@autox.team.net mailing list
///
|