Subject: TR6 Rear Spring RemovalDavid,
Its been a while since I last did this, but I simply put a hydraulic floor
jack under the trailing arm,......
David,
This is a bit late but the last time I did this I had to unbolt the transaxles
to give enough drop to allow extraction of the rear stock springs. This made an
otherwise quicky operation into a bit longer than I expected as the bolts take
a while to remove and put back on. It may not matter much, but mark the mating
surfaces of the transaxles to try and maintain the original orientation for
balance purposes.
///
/// triumphs@autox.team.net mailing list
///
|