triumphs
[Top] [All Lists]

Re: 6 cyl gasket

To: Barry Schwartz <bschwart@pacbell.net>, Amici Triumphi <fot@autox.team.net>, Triumph Newsgroup <triumphs@autox.team.net>
Subject: Re: 6 cyl gasket
From: jmwagner <jmwagner@greenheart.com>
Date: Wed, 21 Feb 2001 14:03:43 -0800
References: <3.0.4.32.20010221133337.008fb830@pacbell.net>
Unlike the TR 2-4A gasket... that will not work with an aluminum cover... This
gasket may work with one...      It's possible that a few modifications with a
razor blade will be required, but nothing too daunting and nothing that would
show after the cover is installed.    I will not have a definitive answer to
that until it's been tested, but it's promising.

--Justin Wagner

Barry Schwartz wrote:

> Justin,
> Silly question.  Will it work for the cast valve covers, or does it need
> the stamped covers "channel" to sit/locate in - the cast one I have, which
> is a very nice cover, doesn't have any channel, but is flat just as the
> head is -
>
> Barry Schwartz (San Diego) bschwart@pacbell.net
>
> 72 PI, V6 Spitfire (daily driver)
> 70 GT6+ (when I don't drive the Spit)
> 70 Spitfire (long term project)

///
///  triumphs@autox.team.net mailing list
///


<Prev in Thread] Current Thread [Next in Thread>
  • Re: 6 cyl gasket, jmwagner <=