Pat,
Here is a trick I was shown when I was restoring my Corvair.
1. you photocopy the gauge face and enlarge it as much as posible on the
photocopier.
2. Touch up any imperfections on the enlarged photocopy.
3. Copy the touched up image back to original size, this can be done on
paper or self adhesive white film.
4. Trim to fit and glue the copy on to your gauge face.
If I remember correctly there is a rim on the gauge face of the TR3
small gauges so this may or may not work but could be worth a try.
Doug Hamilton
1960 TR3A Sebring White
Date: Mon, 5 Feb 2001 16:32:08 -0800
From: "Pat" <pleask@mailhost.wlc.com>
Subject: New gauge faces available ?
New gauge faces and needles
I'm posting this email for a friend of mine doing up a TR3
He is very much wanting new faces and needles for his four gauges. Can
anyone
recommend where he can go to get these please ? Are they even available
?
Thanks, Pat
///
/// triumphs@autox.team.net mailing list
///
|