triumphs
[Top] [All Lists]

Re: Late model TR6 Steering wheel - finishing

To: conrade@qwest.net, triumphs@autox.team.net
Subject: Re: Late model TR6 Steering wheel - finishing
From: LaJoMor@aol.com
Date: Mon, 29 Jan 2001 14:43:38 EST
Eric...
Eastwood's Clear Coat Barrier spray is what you're looking for. Part #13095Z
Clear Nylon Base...can go over painted surfaces also with proper curing of 
the paint (ie time). I've used this on exposed bare metal and it works very 
nicely. I am going to used it on the alloy spokes of my Nardi wheel after it 
is polished. It's also heat resistant to 400 degrees which should just be 
enough for the Colorado summer sun!
Larry 
TR250

///
///  triumphs@autox.team.net mailing list
///


<Prev in Thread] Current Thread [Next in Thread>