Fred,
I have always used naphtha for cleaning oily or greasy parts. I dont know if
this
stuff is compatable with your parts cleaning pump. I know I have seen this
recommendation somewhere in a Triumph manual. I dont have a parts washer but
using the old brush method, after cleaning the part, I just blow off the part
with compressed air and the naphtha evaporates at just the right rate leaving
the
part clean and bone dry. I get my supply by the gallon at Lowes for about $7.00
or so.
Bob Labuz
1958 TR3A
1974 T140V
Fred Thomas wrote:
> Listers, I have a 3 1/2 gal elec. parts washer and have been using NAPA
> degreaser that does not seem to be doing a very good job, open for any
> suggestions on what works well for others. Many Thanks "FT"
///
/// triumphs@autox.team.net mailing list
///
|