Eric and others,
Thanks for the suggestions. I've tried nearly everything with them. The thing
that was dissapointing is that in the past the service from them was always
good. But then I never had a problem with the carbs or parts that I ordered in
the past.
They can't seem to tell me the center to center measurement of the manifold
that they claim will fit. I can't help but think that this is because they
actually don't have a manifold that will fit. I don't want to pay shipping
again for yet another part that won't fit.
I think that the solution to my problem is going to be having an early TR6 head
built by Richard Good and using that with the DCOE's. Are there any known
problems with the early heads?
Thanks,
Don Clark
Seattle, WA
> At 10:05 AM 1/2/2001 +0000, Don Clark wrote:
>
> >I only know about this difference because the dimwits at REDLINE/Weber
> >sent the
> >incorrect DCOE manifold to me over 2 months ago and still haven't been
> >able to
> >get it straightened out. They continue to insist that their application guide
> >is correct.
>
> If their application guide doesn't list things by 1/2 model year and
> destination country then it's incorrect at least some of the time. ;{)
>
> In any case your best bet it to tell them YOUR car is probably 'incorrect'
> due to some previous owner's heap swap and you need the other style.
>
> -Erik
>
> --
> Erik Quackenbush, V.P. Operations, Midwest Filter Corporation
> 1-847-680-0566 fax: 1-847-680-0832 http://www.midwestfilter.com
|